Counter Sink Cobalt HSS
Counter Sink Cobalt HSS
| Tip angle (?) | 90° | Coating Y/N | NA |
|---|
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@misumi-inc.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
GT Carbide Tip Glass Drill
| work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
|---|---|---|---|---|---|
| Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
| Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
Закрыть
GT Drill Set For Ironworking, GTNDR-10
| work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
|---|---|---|---|---|---|
| Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |
Закрыть
Standard Solid Drill with Coating
| work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
|---|---|---|---|---|---|
| Coating Y/N | Available | Coating Type | TiAlN | With/without Oil Hole | NA |
| Torsion(°) | 30 |
Закрыть
Micro Drill, for Stainless Steel
| work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
|---|---|---|---|---|---|
| Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
| shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |
Закрыть
Sweep Cut Drill Reamer Type 3 mm Shank
| work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
|---|---|---|---|---|---|
| Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
| shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
Закрыть
GT Hex Shank Pilot Hole Drill
| work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
|---|---|---|---|---|---|
| Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
| Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Закрыть
HPD Hyper Burnishing Drill AH10
| Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
|---|---|---|---|---|---|
| Coating Type | Non-Coated | With/without Oil Hole | NA |
Закрыть
Carbide 2-Flute Leading Drill 120° D923X
| Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
|---|---|---|---|---|---|
| Coating Type | Other | Tip angle(?) | 120 |