Iron Core Concrete Drill F8 Extreme (SDS Plus Shank) Regular Type
Iron Core Concrete Drill F8 Extreme (SDS Plus Shank) Regular Type
| Effective Length(mm) | 50 | Overall Length(mm) | 110 | Work material | Iron Reinforced Concrete, Granite, Concrete, Natural Stone, etc. |
|---|---|---|---|---|---|
| Compatible Model | Hammer Drill | Shank shape | SDSplus | Material | Blade: Carbide tip |
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@misumi-inc.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
GT Drill Set For Ironworking, GTNDR-10
| work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
|---|---|---|---|---|---|
| Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |
Закрыть
Sweep Cut Drill Reamer Type 3 mm Shank
| work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
|---|---|---|---|---|---|
| Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
| shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
Закрыть
GT Drill Set For Woodwork, WDS-05
| Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
|---|---|---|---|---|---|
| Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
| Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
Закрыть
Super Long Drill
| work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
|---|---|---|---|---|---|
| Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
| Torsion(°) | 30 |
Закрыть
Carbide 2-Flute Leading Drill 120° D923X
| Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
|---|---|---|---|---|---|
| Coating Type | Other | Tip angle(?) | 120 |
Закрыть
Carbide 2-Flute Leading Drill 60° D921X
| Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
|---|---|---|---|---|---|
| Coating Type | Other | Tip angle(?) | 60 |
Закрыть
GT Hex Shank Pilot Hole Drill
| work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
|---|---|---|---|---|---|
| Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
| Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Закрыть
Sweep Cut Drill Straight Shank
| work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
|---|---|---|---|---|---|
| Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
| tip angle(°) | 90 | Torsion(°) | 30 |