WATERMILLS ® End Mill for Aluminum WS345 3-Flute High-Helix A345, No Coating
WATERMILLS ® End Mill for Aluminum WS345 3-Flute High-Helix A345, No Coating
| work material | Aluminum / Copper | Number of flutes(sheet) | 3 | Type | High Helical |
|---|---|---|---|---|---|
| Coating | Non-Coated | Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Torsion Angle (?) | Powerful Torsion (45°-60°) |
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@misumi-inc.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Micro Drill «NEO PRO» Long Blades
| work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
|---|---|---|---|---|---|
| Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
| shank d(mm) | 3 | Torsion(°) | 30 |
Закрыть
Sweep Cut Drill Reamer Type 3 mm Shank
| work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
|---|---|---|---|---|---|
| Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
| shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
Закрыть
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
| Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
|---|---|---|---|---|---|
| Coating Type | Other | Tip angle(?) | 90 |
Закрыть
GT Carbide Tip Glass Drill
| work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
|---|---|---|---|---|---|
| Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
| Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
Закрыть
Micro Drill, for Stainless Steel
| work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
|---|---|---|---|---|---|
| Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
| shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |
Закрыть
GT Middle Titanium Drill Set
| work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Overall Length L(mm) | 80 |
|---|---|---|---|---|---|
| Coating Y/N | Available | Coating Type | TiN | Package vertical(mm) | 130 |
| Package horizontal(mm) | 105 | Package height(mm) | 12 | Shaft diameter(mm) | 6.35 |
| Flute length(mm) | 40 | Drill bit hardness | HRC 58 to 63° | Drillable plate thickness | (Approx.) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 |
| JAN code | 4904781381210 |
Закрыть
GT Drill Set For Woodwork, WDS-03
| Package vertical(mm) | 185 | Package horizontal(mm) | 80 | Package height(mm) | 20 |
|---|---|---|---|---|---|
| Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
| Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387052 |
Закрыть
GT Drill Set For Ironworking, GTNDR-10
| work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
|---|---|---|---|---|---|
| Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |